×
- 390HP CA6DM2 Engine — Proven heavy-duty diesel powertrain built for sustained high-load transport on Algeria's mining and quarry haul routes.
- 6×4 Hub-Reduction Drive — φ300 cast steel hub-reduction rear axle with 5.921 ratio delivers strong traction and durability under full payload on unpaved roads.
- Reinforced 300×80×(8+8)mm Frame — Double-layer frame construction resists bending and fatigue under repeated heavy loading cycles.
- Desert-Ready Configuration — Oil-bath air filter, dual fuel filtration, 400L steel tank, and enhanced cooling keep the truck running in North Africa's demanding climate.
- Export-Ready for Algeria — Factory-fitted English and French markings, Algeria export nameplate, and VIN star-seal — ready for local registration without modification.
The FAW J6P 6×4 dump truck chassis is designed for heavy-duty road, gravel, sand, coal, and resource transport applications. It combines a 390HP CA6DM2 engine, 6×4 drive configuration, heavy-duty frame, hub-reduction rear axle, and 12R22.5 E-mark tires. The export configuration includes a pearl white flat-roof cab, automatic air conditioning, steel fuel tank, front under-run protection, and English and French vehicle markings for the Algeria market. 
| Parameter | Specification |
|---|---|
| Engine | CA6DM2-39E3F with integrated EGR |
| Rated Power | 390HP |
| Drive | 6×4 |
| Gross Vehicle Weight | 25T |
| Transmission | CA10TAX190F with PTO output |
| Clutch | φ430 |
| Rear Axle | φ300 cast steel hub-reduction axle |
| Rear Axle Ratio | 5.921 |
| Wheelbase | 3800+1350mm |
| Frame | 300×80×(8+8)mm |
| Tires | 12R22.5, 18PR, tubeless, E-mark |
| Cab | J6P Africa Edition flat-roof half-row cab |
| Steering Wheel Position | Left-hand drive |
| Fuel | Diesel |
| Emission Standard | Euro 2 (E2) |
| Color | Pearl White |
| Feature | Standard Export Configuration (Algeria) | Notes |
| Cab Type | J6P Africa Edition flat-roof half-row cab | Fixed configuration for the Algeria market |
| Steering System | Left-hand drive (LHD) | Standard / Fixed |
| Engine Model | CA6DM2-39E3F, 390HP, Euro 2 emission standard | Fixed heavy-duty powertrain |
| Transmission | CA10TAX190F 10-speed manual with PTO | PTO-equipped; ready for hydraulic pump installation |
| Rear Axle | phi300 cast steel hub-reduction axle | Standard heavy-duty spec; fixed gear ratio at 5.921 |
| Fuel Tank | 400L steel fuel tank | Standard volume |
| Air Filtration | Oil-bath type air filter | Standard; optimized for highly dusty desert environments |
| Suspension System | 13/14 heavy-duty leaf springs | Standard reinforced spec for Algerian heavy-load conditions |
| Rear Overhang | 900mm | Fixed length for Algerian regulatory compliance |
| Battery Capacity | 150Ah | Standard electrical configuration |
| Cab Tilting System | Manual hydraulic lift | Standard operation |
| Hydraulic Support | Raised hydraulic support preparation | Standard chassis readiness |
| Fuel Filtration | Dual fuel filter system | Standard; ensures high-efficiency water and sediment separation |
| Front Protection | Front Underrun Protection System (FUPS) | Standard safety spec |
| Tachograph | Xinghai drive recorder | Standard driving data log |
| Speed Limiter | Hebei Junrui cruise control and speed limiter | Standard regulatory compliance device |
| Thermostat | 65°C engine thermostat | Standard; optimized for extreme hot climate operations |
| Language & Labels | Dual language: English + French | Factory-installed bilingual labels and plates |
| VIN Marking | Star-seal stamped (Front and Rear) | Special statutory marking requirement for Algeria |
| Dump Body | Not included (Chassis cabin only) | Cargo/Dump body to be selected and fitted by the buyer |
Pre-Delivery
- Export configuration fully prepared at the factory — bilingual labels, Algeria export nameplate, and VIN star-seal completed before shipment.
- Full pre-delivery inspection (PDI) completed; documentation pack includes vehicle manual excerpts in English and French.
Technical Documentation
- English operation and maintenance manual available.
- French language safety labels and operational warnings installed on the vehicle.
- Spare-parts reference list provided on request.
After-Sales Support
- FAW Jiefang international export team provides post-sale technical consultation.
- Spare parts supply chain supports Algeria market through established export channels.
- Remote diagnostics guidance available for engine and transmission fault codes.
Warranty Reference
- Warranty terms are subject to the sales contract. Confirm with your FAW Jiefang export representative at the time of order.
Q1: Is this chassis delivered with a dump body?
A: No. This is a chassis-only product. The dump body, hydraulic lifting system, and any associated equipment are supplied and fitted by the buyer or a body builder. The PTO-ready transmission allows hydraulic pump connection for the lifting system.
Q2: Is this vehicle compliant with Algeria's import and registration requirements?
A: The chassis is configured with Algeria export nameplates, VIN star-seal front and rear, and bilingual labels as required. However, buyers should independently verify current Algerian customs, homologation, and road regulations before import, as requirements may change.
Q3: What emission standard does this vehicle meet?
A: Euro 2 (E2). Confirm that this emission standard is accepted for the intended registration and operating zone in Algeria before purchase.
Q4: What fuel type is required?
A: Diesel only. The CA6DM2-39E3F engine is compatible with standard diesel fuel available in Algeria.
Q5: Can the axle ratio be changed?
A: The rear axle ratio is fixed at 5.921 for this Algeria export configuration, optimised for loaded highway and quarry transport at 50–60km/h economic speed. Contact the FAW Jiefang export team if a different ratio is required for your specific application.
Q6: What is the recommended economic operating speed?
A: 50–60km/h under loaded conditions, as stated in the product specification.
Q7: Is right-hand drive available?
A: No. This configuration is left-hand drive only, which is the standard for Algeria.
Q8: What warranty applies?
A: Warranty terms are defined in the purchase contract. Please confirm directly with your FAW Jiefang export representative.
Q9: Are spare parts available in Algeria?
A: Spare parts are supplied through FAW Jiefang's international export channels. Lead times depend on the specific part. We recommend maintaining a local stock of high-wear items (filters, belts, brake components) based on your operational volume.
Q10: Can this chassis be used outside Algeria?
A: The nameplate and VIN configuration is specific to Algeria. Use in other countries would require verification against local registration requirements. The star-seal VIN configuration is an Algeria-specific requirement.
EN
