×
- Hydraulic Dump Body Ready — MG85BH transmission with sub-transmission provides a ready-to-connect hydraulic pump output for dump body operation — no additional powertrain modification required.
- Reinforced Double-Layer Frame — 760×150×60×(4+4)mm reinforced frame resists the cyclic stress of repeated dump-body lift cycles, extending chassis service life under daily construction site operation.
- Short 2800mm Wheelbase — Tighter turning radius than the cargo models improves manoeuvrability in confined Algerian construction sites, narrow municipal yards, and agricultural access lanes.
- 5.571 High-Ratio Rear Axle — Greater low-speed torque compared to the cargo models — suited to the loaded uphill movement and rough terrain typical of light construction dump operations.
- Entry-Level Dump Cost — The most accessible price point in the Algeria export dump truck range, suited to small contractors, municipal maintenance fleets, and agricultural operators starting or expanding their dump truck capacity.
The FAW HuVR 3.5T single cab dump truck chassis is prepared for light construction, municipal, and material-handling applications. It features a 110HP CA4DB1 engine, 4×2 drive, 5-speed transmission with sub-transmission, reinforced 760×150×60×(4+4)mm frame, and a hydraulic dump body installation platform. The Yunnan white export configuration includes ABS, air brake, air conditioning, electric windows, central locking, and an 89km/h speed limiter.
| Specification | Details |
|---|---|
| Engine | CA4DB1-11E3 |
| Rated Power | 110HP |
| Drive Configuration | 4×2 |
| Vehicle Class | 3.5T light-duty truck |
| Cab | HuVR single cab |
| Wheelbase | 2800 mm |
| Transmission | Wanliyang MG85BH, 5-speed transmission with sub-transmission |
| Clutch | Φ275 clutch |
| Front Axle | DR061 front axle |
| Rear Axle | 1058 welded rear axle |
| Rear Axle Ratio | 5.571 |
| Frame | 760 × 150 × 60 × (4 + 4) mm reinforced frame |
| Tires | 7.00R16, 14PR |
| Fuel Tank | 80L aluminum fuel tank |
| Suspension | 3/7 + leaf spring suspension |
| Fuel Type | Diesel |
| Color | Yunnan White |
| Intended Body | Dump body to be fitted |
The Entry-Level Dump Platform for Algeria's Construction and Municipal Sector
Regulatory compliance: Left-hand drive; Algeria export nameplate; French instrument panel.
Hydraulic dump body ready: MG85BH transmission with sub-transmission provides the hydraulic pump drive output needed for dump body operation — the chassis is ready for dump body and hydraulic system installation without additional powertrain modifications.
Reinforced frame: 760×150×60×(4+4)mm double-layer reinforced frame provides greater resistance to the cyclic stress of repeated dump-body lift cycles compared to the single-layer frame on the cargo models.
Shorter wheelbase for site manoeuvring: 2800mm wheelbase (shorter than the 3300mm cargo models) improves turning radius and site manoeuvrability in confined Algerian construction site and municipal yard environments.
Higher rear axle ratio: 5.571 rear axle ratio provides greater low-speed torque than the cargo models — suited to the loaded uphill and rough-terrain movement typical of construction dump operations.
89km/h speed limiter: Meets Algeria's commercial vehicle highway speed regulation.
ABS + air brake: Active safety braking on varied construction site surfaces.
Air conditioning: Operator comfort in Algeria's climate — standard for all-day construction site operation.
Low acquisition cost: The 3.5T light dump chassis offers the lowest entry cost in the Algeria export dump truck range, suitable for small construction contractors, municipal maintenance fleets, and agricultural operators.
| Feature | 3.5T Single Cab Dump (This Model) | 3.5T Single Cab Cargo | 3.5T Double Cab Cargo |
|---|---|---|---|
| Primary Use | Dump operations | Cargo distribution | Multi-person transportation + cargo delivery |
| Transmission | MG85BH 5-speed transmission + sub-transmission | MG85B 5-speed transmission | 6GS42B 6-speed transmission |
| Frame | 760 × 150 × 60 × (4 + 4) mm reinforced frame | 760 × 150 × 60 × 4 mm standard frame | 760 × 150 × 60 × 4 mm standard frame |
| Wheelbase | 2800 mm (shorter wheelbase for better site maneuverability) | 3300 mm | 3300 mm |
| Rear Axle Ratio | 5.571 (higher torque output) | 5.125 | 5.375 |
| Cargo / Dump Body | No body included (dump chassis only) | 4.2 m corrugated cargo body | 3.2 m cargo box |
| Hydraulic Pump | Buyer-installed; sub-transmission power output available | Not applicable | Not applicable |
| Rear Overhang | Standard dump configuration | Standard configuration | Standard configuration |
| Airbag | Single airbag (driver) | Single airbag (driver) | Dual airbags (driver + passenger) |
| Best For | Light construction dump applications | Regional cargo distribution | Crew transportation with cargo delivery |
Pre-Delivery
Algeria export nameplate factory-fitted; French instrument panel installed.
Pre-delivery inspection; documentation in French and English.
Sub-transmission output specification available for dump body builder reference.
Technical Documentation
French instrument panel.
English supplementary technical reference.
MG85BH sub-transmission output specification on request for body builder.
After-Sales Support
FAW Jiefang international export technical consultation.
Spare parts via international export channels.
Remote support for engine, ABS, brake, and sub-transmission systems.
Warranty Reference
Subject to the sales contract. Confirm with FAW Jiefang export representative.
Q1: Is the dump body included?
A: No. This is a chassis-only product. The dump body, hydraulic cylinder, hydraulic pump, control valve, and oil tank are sourced and fitted by the buyer or a specialist dump body builder.
Q2: What is the sub-transmission and why does the dump model need it?
A: The sub-transmission (副变速箱) is an additional gear reduction unit mounted after the main transmission. It provides a low-speed, high-torque power take-off output for the hydraulic pump that drives the dump body lifting cylinder. Without the sub-transmission, the hydraulic pump would not receive sufficient torque at low engine speeds to lift a loaded dump body.
Q3: What dump body sizes are compatible with this chassis?
A: The 2800mm wheelbase and 3.5T GVW limit the dump body to lightweight steel or aluminium bodies typically in the 2.5–3.5m³ volume range for sand, gravel, and soil. The exact body size depends on the density of the material being carried and the body weight. Confirm with the dump body builder.
Q4: Why is the wheelbase shorter (2800mm) than the cargo models (3300mm)?
A: A shorter wheelbase improves turning radius, which is critical for manoeuvring on confined construction sites, narrow municipal service lanes, and agricultural yards — the primary operating environments for this light dump chassis.
Q5: Is this vehicle compliant with Algeria's import and registration requirements?
A: Algeria export nameplate and French instrument panel are factory-fitted. Buyers must independently verify current Algerian customs, homologation, and road regulations.
Q6: What emission standard does this meet?
A: Euro 2 (E2). Confirm acceptance for the intended registration zone.
Q7: Can this chassis be used for municipal waste collection?
A: The chassis could theoretically support a small tipper or skip body for light waste collection. However, waste collection vehicles typically require specialised body configurations (compactor, skip lift) that must be evaluated by the body builder against this chassis specification. Confirm suitability before ordering.
Q8: Is right-hand drive available?
A: No. Left-hand drive only for Algeria.
Q9: What materials is this dump chassis suited to carry?
A: Sand, gravel, soil, crushed stone, agricultural produce, and light demolition rubble — within the 3.5T GVW limit. Do not use for dense materials (wet concrete, heavy metal scrap) that would exceed the GVW rating with a small volume.
Q10: What spare parts should be stocked locally?
A: Recommended: sub-transmission seal kit, hydraulic pump coupling, hydraulic hose and fittings, reinforced frame repair plates, ABS sensor, brake shoes, and 7.00R16 spare tyre.
EN
